The Corab PB-094 is a system allowing for instant module assembly, in less than 30 seconds per module. The structure can be either ballasted or invasive. The system has been designed for south-oriented installations. High corrosion resistance is guaranteed by Magnelis, from which the entire structure is made.
Corab PI-094M is a photovoltaic system which offers many advantages, including very fast installation and support coverage with corrosion-resistant Magnelis. It is a structure dedicated to roofs covered with a membrane or bituminous tiles. Thanks to the use of feet with a large surface area, it distributes the weight of the installation in a way that is safe for the roof.
Corab System T-05M is a photovoltaic structure dedicated to pitched roofs with an inclination from 6 to 16 degrees covered with a membrane or bituminous tiles. This solution guarantees not only a safe distribution of the weight of the entire installation but also ensures the complete tightness of the insulation. The assembly method can be described as invasive, but thanks to the welding of bituminous tiles or membrane, the roof remains tight.
The modules can be installed both vertically and horizontally.
Corab B-01 system is a construction dedicated for metal roof tiles. Made of high quality aluminum and stainless steel. Adjustment is possible in this system. Installation can be completed both vertically and horizontally.
Corab B-02 system is a photovoltaic construction dedicated for metal roof tiles. In order to make assembly easier, a special adapter has been used connecting double thread with aluminum rail and increasing adjustment range at the same time. The material used is high-quality aluminum and stainless steel. Both horizontal and vertical modules arrangement can be used.
Corab B-03 system is a construction for pitched roofs covered with seam sheet. The system is made of high quality aluminum and stainless steel. Handle attached to the sheet is equipped with additional insulation protecting it against damage. The handle is adjustable. The system enables modules to be installed both vertically and horizontally.
Corab B-057 system is a new construction dedicated for steel roof tiles. The distinguishing feature of this solution is that the assembly is not made to the rafters, but to the sheet. It facilitates and speeds up the assembly, especially on the roof, where it is difficult to find rafters. A new type of SMB-065 rail was used here. Modules can be installed vertically and horizontally.
Corab D-01 system is a construction dedicated for ceramic tiles. Durable and stable bracket is mounted to the rafters. Made of high quality aluminum and stainless steel. Flexible modules mounting, both vertically and horizontally. The assembly is made easier by the adjustment of rafter holders.
Corab D-02 system is a photovoltaic construction dedicated for plain tiles. Made of high quality aluminum and stainless steel. Modules can be installed both vertically and horizontally. The adjustment is made on the rafter holders.
Corab D-03 system is a photovoltaic construction dedicated for bituminous tiles. It allows modules to be installed both vertically and horizontally. It is made of high quality aluminum and stainless steel. Rigid and stable rafter grip is adjustable.
Corab D-057 system is a photovoltaic construction dedicated for plain tiles. Modules can be installed both vertically and horizontally. The system complies with the applicable standards, which guarantees safety.
Corab PB-062 system is an aerodynamic photovoltaic construction dedicated for flat roofs. Modules orientation is East-West and slope angle is 10 degrees. It is made of high-quality aluminum. It is a weight system and has dedicated ballast platforms. It is equipped with additional insulation protecting roof against friction of aluminum elements.
Corab PB-064 system is a south-oriented ballast solution. It is made of high-quality aluminum and stainless steel. A wind brace is included. The insulation used is also very important, as it protects the roof againts damage. Slope angle is 10 degrees. The rows can be joined together.
Corab PB-064B system is a ballast structure for flat roofs. Slope angle is 10 degrees. Made of high quality aluminum and stainless steel. Modules orientation is dedicated to south-oriented installations. Additional elements include a wind brace and insulation protecting roof against damage. In this system, the ballast blocks are hidden under the modules saving space on the roof. Rows cannot be joined together.
Corab PB-068 system is a ballast construction for flat roofs. Slope angle is 15 degrees. It is made of high quality aluminum and stainless steel. It allows modules to be south oriented. The system also includes a windbrace. In order to protect roof from possible damage, special insulation was used. The rows can be joined together.
Corab PB-068B system is a ballast solution dedicated for flat roofs. Slope angle is 15 degrees. Made of high quality aluminum and stainless steel. Dedicated for south-oriented installations. The system is equipped with a wind brace and insulation that protects roof against damage. The ballast blocks are placed under modules saving space. Rows cannot be joined together.
Corab PB-092 system is a solution that allows clamp free modules assembly in less than 30 seconds per module. The structure can be both ballast and invasive (attached to the roof surface). Dedicated to south oriented installations. The module is mounted horizontally, and slope angle is 25 degrees. It is made entirely of Magnelis, which guarantees high anti-corrosion resistance. The modules are installed horizontally. The additional advantage is lower cost of the installation maintenance, due to lack of clamp connections.
Corab PB-093 system is distinguished by quick and trouble-free module assembly in less than 30 seconds. It is entirely made of Magnelis steel indicating high resistance to corrosion. The modules are installed vertically. The structure can be both invasive (pinned to the roof) and ballast. Dedicated for south-oriented installations. The additional advantage is lower cost of maintenance service, due to lack of clamp connections.
Corab T-02 system is a photovoltaic construction for mounting on a trapezoid sheet. Modules can be arranged both vertically and horizontally. The system is very easy to install, and thanks to small number of short elements, it is also easy and cheap to transport. Aluminum bridges are insulated for further metal sheet protection against damages.