The Corab PB-094 is a system allowing for instant module assembly, in less than 30 seconds per module. The structure can be either ballasted or invasive. The system has been designed for south-oriented installations. High corrosion resistance is guaranteed by Magnelis, from which the entire structure is made.
Corab PI-094M is a photovoltaic system which offers many advantages, including very fast installation and support coverage with corrosion-resistant Magnelis. It is a structure dedicated to roofs covered with a membrane or bituminous tiles. Thanks to the use of feet with a large surface area, it distributes the weight of the installation in a way that is safe for the roof.
Corab System T-05M is a photovoltaic structure dedicated to pitched roofs with an inclination from 6 to 16 degrees covered with a membrane or bituminous tiles. This solution guarantees not only a safe distribution of the weight of the entire installation but also ensures the complete tightness of the insulation. The assembly method can be described as invasive, but thanks to the welding of bituminous tiles or membrane, the roof remains tight.
The modules can be installed both vertically and horizontally.
Corab B-01 system is a construction dedicated for metal roof tiles. Made of high quality aluminum and stainless steel. Adjustment is possible in this system. Installation can be completed both vertically and horizontally.
Corab B-02 system is a photovoltaic construction dedicated for metal roof tiles. In order to make assembly easier, a special adapter has been used connecting double thread with aluminum rail and increasing adjustment range at the same time. The material used is high-quality aluminum and stainless steel. Both horizontal and vertical modules arrangement can be used.
Corab B-03 system is a construction for pitched roofs covered with seam sheet. The system is made of high quality aluminum and stainless steel. Handle attached to the sheet is equipped with additional insulation protecting it against damage. The handle is adjustable. The system enables modules to be installed both vertically and horizontally.
Corab B-057 system is a new construction dedicated for steel roof tiles. The distinguishing feature of this solution is that the assembly is not made to the rafters, but to the sheet. It facilitates and speeds up the assembly, especially on the roof, where it is difficult to find rafters. A new type of SMB-065 rail was used here. Modules can be installed vertically and horizontally.
Corab D-01 system is a construction dedicated for ceramic tiles. Durable and stable bracket is mounted to the rafters. Made of high quality aluminum and stainless steel. Flexible modules mounting, both vertically and horizontally. The assembly is made easier by the adjustment of rafter holders.
Corab D-02 system is a photovoltaic construction dedicated for plain tiles. Made of high quality aluminum and stainless steel. Modules can be installed both vertically and horizontally. The adjustment is made on the rafter holders.
Corab D-03 system is a photovoltaic construction dedicated for bituminous tiles. It allows modules to be installed both vertically and horizontally. It is made of high quality aluminum and stainless steel. Rigid and stable rafter grip is adjustable.
Corab D-057 system is a photovoltaic construction dedicated for plain tiles. Modules can be installed both vertically and horizontally. The system complies with the applicable standards, which guarantees safety.
Corab PB-062 system is an aerodynamic photovoltaic construction dedicated for flat roofs. Modules orientation is East-West and slope angle is 10 degrees. It is made of high-quality aluminum. It is a weight system and has dedicated ballast platforms. It is equipped with additional insulation protecting roof against friction of aluminum elements.
The Corab PB-094 is a system allowing for instant module assembly, in less than 30 seconds per module. The structure can be either ballasted or invasive. The system has been designed for south-oriented installations. High corrosion resistance is guaranteed by Magnelis, from which the entire structure is made.
Corab PI-094M is a photovoltaic system which offers many advantages, including very fast installation and support coverage with corrosion-resistant Magnelis. It is a structure dedicated to roofs covered with a membrane or bituminous tiles. Thanks to the use of feet with a large surface area, it distributes the weight of the installation in a way that is safe for the roof.
Corab System T-05M is a photovoltaic structure dedicated to pitched roofs with an inclination from 6 to 16 degrees covered with a membrane or bituminous tiles. This solution guarantees not only a safe distribution of the weight of the entire installation but also ensures the complete tightness of the insulation. The assembly method can be described as invasive, but thanks to the welding of bituminous tiles or membrane, the roof remains tight.
The modules can be installed both vertically and horizontally.
Corab B-01 system is a construction dedicated for metal roof tiles. Made of high quality aluminum and stainless steel. Adjustment is possible in this system. Installation can be completed both vertically and horizontally.
Corab B-02 system is a photovoltaic construction dedicated for metal roof tiles. In order to make assembly easier, a special adapter has been used connecting double thread with aluminum rail and increasing adjustment range at the same time. The material used is high-quality aluminum and stainless steel. Both horizontal and vertical modules arrangement can be used.
Corab B-03 system is a construction for pitched roofs covered with seam sheet. The system is made of high quality aluminum and stainless steel. Handle attached to the sheet is equipped with additional insulation protecting it against damage. The handle is adjustable. The system enables modules to be installed both vertically and horizontally.
Corab B-057 system is a new construction dedicated for steel roof tiles. The distinguishing feature of this solution is that the assembly is not made to the rafters, but to the sheet. It facilitates and speeds up the assembly, especially on the roof, where it is difficult to find rafters. A new type of SMB-065 rail was used here. Modules can be installed vertically and horizontally.
Corab D-01 system is a construction dedicated for ceramic tiles. Durable and stable bracket is mounted to the rafters. Made of high quality aluminum and stainless steel. Flexible modules mounting, both vertically and horizontally. The assembly is made easier by the adjustment of rafter holders.
Corab D-02 system is a photovoltaic construction dedicated for plain tiles. Made of high quality aluminum and stainless steel. Modules can be installed both vertically and horizontally. The adjustment is made on the rafter holders.
Corab D-03 system is a photovoltaic construction dedicated for bituminous tiles. It allows modules to be installed both vertically and horizontally. It is made of high quality aluminum and stainless steel. Rigid and stable rafter grip is adjustable.
Corab D-057 system is a photovoltaic construction dedicated for plain tiles. Modules can be installed both vertically and horizontally. The system complies with the applicable standards, which guarantees safety.
Corab PB-062 system is an aerodynamic photovoltaic construction dedicated for flat roofs. Modules orientation is East-West and slope angle is 10 degrees. It is made of high-quality aluminum. It is a weight system and has dedicated ballast platforms. It is equipped with additional insulation protecting roof against friction of aluminum elements.