The Corab PB-094 is a system allowing for instant module assembly, in less than 30 seconds per module. The structure can be either ballasted or invasive. The system has been designed for south-oriented installations. High corrosion resistance is guaranteed by Magnelis, from which the entire structure is made.
Corab PI-094M is a photovoltaic system which offers many advantages, including very fast installation and support coverage with corrosion-resistant Magnelis. It is a structure dedicated to roofs covered with a membrane or bituminous tiles. Thanks to the use of feet with a large surface area, it distributes the weight of the installation in a way that is safe for the roof.
Corab PB-062 system is an aerodynamic photovoltaic construction dedicated for flat roofs. Modules orientation is East-West and slope angle is 10 degrees. It is made of high-quality aluminum. It is a weight system and has dedicated ballast platforms. It is equipped with additional insulation protecting roof against friction of aluminum elements.
Corab PB-064 system is a south-oriented ballast solution. It is made of high-quality aluminum and stainless steel. A wind brace is included. The insulation used is also very important, as it protects the roof againts damage. Slope angle is 10 degrees. The rows can be joined together.
Corab PB-064B system is a ballast structure for flat roofs. Slope angle is 10 degrees. Made of high quality aluminum and stainless steel. Modules orientation is dedicated to south-oriented installations. Additional elements include a wind brace and insulation protecting roof against damage. In this system, the ballast blocks are hidden under the modules saving space on the roof. Rows cannot be joined together.
Corab PB-068 system is a ballast construction for flat roofs. Slope angle is 15 degrees. It is made of high quality aluminum and stainless steel. It allows modules to be south oriented. The system also includes a windbrace. In order to protect roof from possible damage, special insulation was used. The rows can be joined together.
Corab PB-068B system is a ballast solution dedicated for flat roofs. Slope angle is 15 degrees. Made of high quality aluminum and stainless steel. Dedicated for south-oriented installations. The system is equipped with a wind brace and insulation that protects roof against damage. The ballast blocks are placed under modules saving space. Rows cannot be joined together.
Corab PB-092 system is a solution that allows clamp free modules assembly in less than 30 seconds per module. The structure can be both ballast and invasive (attached to the roof surface). Dedicated to south oriented installations. The module is mounted horizontally, and slope angle is 25 degrees. It is made entirely of Magnelis, which guarantees high anti-corrosion resistance. The modules are installed horizontally. The additional advantage is lower cost of the installation maintenance, due to lack of clamp connections.
Showing 1–16 of 17 results
The Corab PB-094 is a system allowing for instant module assembly, in less than 30 seconds per module. The structure can be either ballasted or invasive. The system has been designed for south-oriented installations. High corrosion resistance is guaranteed by Magnelis, from which the entire structure is made.
Corab PI-094M is a photovoltaic system which offers many advantages, including very fast installation and support coverage with corrosion-resistant Magnelis. It is a structure dedicated to roofs covered with a membrane or bituminous tiles. Thanks to the use of feet with a large surface area, it distributes the weight of the installation in a way that is safe for the roof.
Corab PB-062 system is an aerodynamic photovoltaic construction dedicated for flat roofs. Modules orientation is East-West and slope angle is 10 degrees. It is made of high-quality aluminum. It is a weight system and has dedicated ballast platforms. It is equipped with additional insulation protecting roof against friction of aluminum elements.
Corab PB-064 system is a south-oriented ballast solution. It is made of high-quality aluminum and stainless steel. A wind brace is included. The insulation used is also very important, as it protects the roof againts damage. Slope angle is 10 degrees. The rows can be joined together.
Corab PB-064B system is a ballast structure for flat roofs. Slope angle is 10 degrees. Made of high quality aluminum and stainless steel. Modules orientation is dedicated to south-oriented installations. Additional elements include a wind brace and insulation protecting roof against damage. In this system, the ballast blocks are hidden under the modules saving space on the roof. Rows cannot be joined together.
Corab PB-068 system is a ballast construction for flat roofs. Slope angle is 15 degrees. It is made of high quality aluminum and stainless steel. It allows modules to be south oriented. The system also includes a windbrace. In order to protect roof from possible damage, special insulation was used. The rows can be joined together.
Corab PB-068B system is a ballast solution dedicated for flat roofs. Slope angle is 15 degrees. Made of high quality aluminum and stainless steel. Dedicated for south-oriented installations. The system is equipped with a wind brace and insulation that protects roof against damage. The ballast blocks are placed under modules saving space. Rows cannot be joined together.
Corab PB-092 system is a solution that allows clamp free modules assembly in less than 30 seconds per module. The structure can be both ballast and invasive (attached to the roof surface). Dedicated to south oriented installations. The module is mounted horizontally, and slope angle is 25 degrees. It is made entirely of Magnelis, which guarantees high anti-corrosion resistance. The modules are installed horizontally. The additional advantage is lower cost of the installation maintenance, due to lack of clamp connections.